一、ZSTWB高速水雾喷头概述
二、ZSTWB高速水雾喷头特点
雾化形式：压力水进入喷头后，被分解成沿内壁运动的旋转水流，经混合腔在离心力作用下，由特定的喷口喷出，形成雾化。本产品采用黄铜棒材制造，外表面镀铬。特殊要求可提供不锈钢材质。
Features:
Water enter the shower nozzle atomizing forms: pressure, along the wall motion are decomposed into the rotation of the water flow, the mixing chamber under the effect of centrifugal force, by specific nozzle jet, formation of atomization. This product USES brass rod manufacturing, surface plating chrome. Special requirements can provide stainless steel material.
三、ZSTWB高速水雾喷头技术特性
Technical features:
|
型号规格 |
流量(L/min) |
流量系数(K) |
雾化角度 |
额定压力 |
工作压力范围 |
链接螺纹口径 |
|
ZSTWB-30-60/90/120 |
30 |
K=16 |
60/90/120 |
0.35MPa |
0.28~0.8MPa |
G1/2(DN15) |
|
ZSTWB-40-60/90/120 |
40 |
K=21.5 |
60/90/120 |
0.35MPa |
0.28~0.8MPa |
G1/2(DN15) |
|
ZSTWB-50-60/90/120 |
50 |
K=26.5 |
60/90/120 |
0.35MPa |
0.28~0.8MPa |
G3/4(DN20) |
|
ZSTWB-63-60/90/120 |
63 |
K=33.7 |
60/90/120 |
0.35MPa |
0.28~0.8MPa |
G3/4(DN20) |
|
ZSTWB-80-60/90/120 |
80 |
K=43 |
60/90/120 |
0.35MPa |
0.28~0.8MPa |
G3/4(DN20) |
|
ZSTWB-100-60/90/120 |
100 |
K=53.5 |
60/90/120 |
0.35MPa |
0.28~0.8MPa |
G3/4(DN20) |
|
ZSTWB-125-90 |
125 |
K=67.5 |
90 |
0.35MPa |
0.28~0.8MPa |
G1(DN25) |
|
ZSTWB-150-90 |
150 |
K=80 |
90 |
0.35MPa |
0.28~0.8MPa |
G1(DN25) |
|
ZSTWB-160-90 |
160 |
K=86 |
90 |
0.35MPa |
0.28~0.8MPa |
G1(DN25) |
|
ZSTWB-200-90 |
200 |
K=107 |
90 |
0.35MPa |
0.28~0.8MPa |
G1(DN25) |
|
ZSTWB-220-90 |
220 |
K=117 |
90 |
0.35MPa |
0.28~0.8MPa |
G1(DN25) |
|
ZSTWB-300-90 |
300 |
K=160 |
90 |
0.35MPa |
0.28~0.8MPa |
G1(DN25) |
|
ZSTWB-X-X(特殊型号) |
特殊参数详情,请咨询本公司! |
|||||
连接螺纹：R1/2"、R3/4"、R1"
流量特性系数：K=16、21.5、26.5、33.7、43、53.5、67.5、80、86、107、117、160
雾化角：60°、90°、120°
额定工作压力：0.35MPa
工作压力范围：0.28~0.8MPa
可根据防护区域的要求配置：万向接头、防尘罩、过滤器
Nominal diameter: DN15, 20, 25
Connection thread: R1/2 ", R3/4, R1
Flow characteristic coefficient K = 16, 43, 21.5, 26.5, 33.7, 21.5, 67.5, 80, 86, 107, 117, 160
Atomization Angle 60 °, 90 °, 120 °
The rated working pressure: 0.35 MPa
Working pressure range: 0.28 ~ 0.8 MPa
Can be according to the requirement of the protective area configuration: universal joint, dust cover, filter
四、ZSTWB高速水雾喷头其他
可根据防护区域的要求配置：万向接头、防尘罩、过滤器。
本产品采用黄铜棒材制造，外表面镀鉻或本色钝化处理，可供用户选择。特殊要求可提供不锈钢材质。
优先选用16-90、26.5-120、33.7-120、43-90、43-120型。
Other:
Can be according to the requirement of the protective area configuration: universal joint, dust cover, filter.
This product is made of brass bars). Surface passivation of chrome plated or instinctive quality, for users to choose. Special requirements can provide stainless steel material.
Priority choose 16-90, 26.5 90, 33.7 120, 43-90, 43-120.